SFP Pluggable Modules Equipment and Port Configuration
7. In Configuration (Applications/Multiservice over PSN) of MiTOP-1
PSN parameters - for work with Tagged VLANs, set VLAN tagging Enable and then
VID and its priority (the same will be in ETH port of ML). Return and Save.
Service Parameters - set Payload size and Jitter buffer (change default value of
500uSec to 2000uSec). Return and Save
Set Connection Status Enable and Save
8. In Monitoring you can see: Alarms (in Status), E3/T3 and Ethernet statistics,
Connection status and statistics.
To Next Page
Loading...