Description and Basic Operation of the SDA-5500 and 5510: Using Auto Test
260
13
Fig. 13-36 The Auto Test Results Mode
A table with all testing intervals and test site information is now displayed. If
the Auto Test was performed immediately, then only one interval is
displayed. If the Auto Test was performed using scheduled intervals, then all
the interval numbers are displayed (Fig. 13-37). The Print All soft key is
used to send all intervals in the directory to the printer.
Information provided on each interval includes:
• Interval number
• Date measurement was made
• Time measurement was made
• Temperature
• Pass/Fail test results
To Next Page
Loading...
