Acterna SDA-5000 - Edit Channel Plan

Channel Plans: Setting Channel Plan Parameters
43
3
down diamond keys to set the frequency, press the Enter
key, then press the OK soft key. As the plan starts, you’ll see
the basic plan information and the channels being
programmed into the plan.
CAUTION ! You must press the Enter key to register this
frequency as the upper limit.
When it’s building the channel plan, the SDA sequences through all
channels in the selected base plan up to the Stop Frequency you entered.
To halt the process, press the Stop soft key.
When the channel plan is complete, the screen displays the name and
format for the plan, and the number of enabled channels. The display also
confirms that the first and last enabled channels are tilt enabled.
NOTE: The following section discusses the Tilt Channel
option.
Press the OK soft key and you’re returned to the main CHANNEL PLAN
screen shown in Fig. 3-2.
Edit Channel Plan
This feature enables you to scroll through the entire list of channels in the
plan, select each channel, and edit parameters for each. You can also add
and delete channels from your plan.
1. From the main CHANNEL PLAN menu, select Edit Channel
Plan and press the icon to the right of the Edit Box. The
EDIT CHANNEL PLAN screen appears (see Fig. 3-8).