Important safety instructions
The following table defines safety terms. Failure to observe these precautions
while using the Stealth Digital Analyzer violates the intended use of this product.
When using the product, basic safety precautions should always be followed to
reduce the risk of fire, shock, and injury to persons, including the following:
1 Read and follow all warning notices and instructions marked on the
product and included in the manual.
2 Use only the AC Adapter/Charger supplied with the product.
3 Do not use AC Adapter/Charger outdoors or in wet or damp locations.
4 Connect the AC Adapter/Charger to the correct mains voltage, as
indicated on the ratings label.
5 This product is intended to be used with a 3-wire grounding-type
plug—a plug that has a grounding pin. This safety feature is vital to
the safe operation of the instrument. Do not defeat the purpose of the
grounding-type plug by modifying the plug or using an adapter.
6 Do not allow anything to rest on the power cord, and do not locate the
product where persons can walk on the power cord.
7 Avoid using this product during an electrical storm. There may be a
remote risk of electric shock from lightning.
8 Do not use this product in the vicinity of a gas leak or in any explosive
environment.
Safety definitions
Term Description
DANGER Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury. It may also
be used to alert against unsafe practices.
To Next Page
Loading...
Need help?
General
