EasyManua.ls Logo

Acterna SDA-5000 - New Features and Benefits of the SDA-5000

Acterna SDA-5000
411 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The SDA Family: Headend Units (SDA-5500 and SDA-5510)
5
1
measurements with remote (PathTrak System/headend) spectrum
measurements.
New Features and Benefits of the SDA-5000
• Faster forward sweep with all signals, including 64/256 QAM carriers
• QAM digital analysis (OPT4)
• Improved interoperation with StealthWare
• CW loopback
• Sweep loopback
• Efficient, practical, graphical test point compensation configuration
SDA-5500 Stealth Sweep Transceiver
The SDA-5500 is a standard 19" rack mount unit weighing approximately
fifteen pounds. Its 320 X 240 dot matrix LCD shows measurement data in
both graphical and numerical form. It is a full-featured signal analysis meter
with a complete spectrum display and an analog representation of single
channel measurement data. When tuned to a specific channel, a
comprehensive set of information is provided, including:
• tuned channel
• video frequency and level
• audio frequency and level
• differences between video and audio carrier levels
The SDA-5500 performs essential cable TV system preventive maintenance
tests with accuracy and ease. Signal levels, hum, C/N, and, in tandem with
the SDA-5000, frequency response, can be quickly tested without interfering
with subscribers’ service.
The Sweep System is made up of two components: the field unit (SDA-
5000), and one or both of the headend units (SDA-5500 and SDA-5510).
Sweep response is tested by injecting a low-level signal in vacant spectrum
areas and by monitoring cable system carrier levels in occupied spectrum
HEADEND UNITS (SDA-5500 AND SDA-5510)

Table of Contents

Other manuals for Acterna SDA-5000

Related product manuals