Channel Plans: Setting Channel Plan Parameters
47
3
Table 3-1 Carrier Types and Parameters
• Frequency (MHz): This parameter sets the frequency of the carrier (for
TV and DUAL types, this is the frequency of the video carrier). Press the
Enter soft key and enter the frequency by using the numeric keypad or
the up and down diamond keys. Then press the Enter soft key to commit
the entry.
Digital
Carrier
(DIGI)
QAM
Digital
Stream
(QAM)
Video +
Dual
Audio
Channels
(DUAL)
Single
Carrier
(SNGL)
Video
Channel
(TV)
Sweep
Insertion
Point
(SWP)
Enabled
✔ ✔ ✔ ✔ ✔ ✔
Type
✔ ✔ ✔ ✔ ✔ ✔
Frequency (MHz)
✔ ✔ ✔ ✔ ✔ ✔
Channel Number
✔ ✔ ✔ ✔ ✔
Label
✔ ✔ ✔ ✔ ✔
Sweep Channel
✔ ✔ ✔ ✔ ✔
Measurement
Bandwidth (MHz)
✔ ✔ ✔ ✔
Noise Offset (MHz)
✔ ✔ ✔ ✔ ✔
Tilt Channel
✔ ✔ ✔
Scrambled
✔ ✔
Audio Offset 1
(MHz)
✔ ✔
Audio Offset 2
(MHz)
✔
Modulation
✔
Symbol Rate
✔
Standard
✔
Spectrum Inversion
✔
To Next Page
Loading...
