Total Access 5000 Business Services Deployment Guide
3-24 65K510DEP08-1A
Accounting Example
Inthefollowingexample,level1and15commandaccountingisenabled.
TA5000#configure terminal
TA5000(config)#aaa accounting commands 1 default stop-only group
tacacs+
TA5000(config)#aaa accounting commands 15 default stop-only group
tacacs+
Configure Local User Accounts
Thissectiondetailsthefollowinginformation:
• Createanewuseraccount
•Modifyanexistinguseraccount
• Deleteanexistinguseraccount
• Configurethepasswordcomplexity
Create a New User Account
TocreateanewlocalusertotheTotalAccess5000,completethefollowingprocedure:
1. FromtheEnableprompt,type
configure terminal,andpressENTERtoaccesstheGlo‐
balConfigurationprompt.
2. FromtheGlobalConfigurationprompt,type
security,andpressENTERtoaccessthe
SecurityConfigurationprompt.
3. FromtheSecurityConfigurationprompt,type
username WORD,andpressENTERtocreate
anewuserandaccesstheUserConfigurationprompt.
4. FromtheUserConfigurationprompt,type
password,andpressENTERtoaccessthe
PasswordEntryprompt.
5. FromthePasswordEntryprompt,typethepasswordfortheuser,andpress
ENTER.
6. FromtheUserConfigurationprompt,type
privilege [admin|config|read-
only|read-write|test]
,andpressENTERtosettheuserprivilegelevel.
Thedefaultvaluewhenanewuseriscreatedisread‐only.
7. FromtheUserConfigurationprompt,type
no disabletoenabletheusernam e.
8. Type
end,andpressENTERtoreturntotheEnableprompt.
Modify an Existing User Account
TomodifyanexistinguseraccountontheTotalAccess5000,completethefollowing
procedure:
1. FromtheEnableprompt,type
configure terminal,andpressENTERtoaccesstheGlo‐
balConfigurationprompt.
2. FromtheGlobalConfigurationprompt,type
security,andpressENTERtoaccessthe
SecurityConfigurationprompt.
3. FromtheSecurityConfigurationprompt,type
username WORD,andpressENTERtoaccess
anexistinguseraccountandaccesstheUserConfigurationprompt.