ADTRAN TA 5000 User Manual

Appendix L, RPR Provisioning - Central Office Terminal (COT) Node Provisioning
65K510DEP08-1A L-5
Figure L-3. RPR Line Module Main Menu
Provision the RPR Line Module Service State
ThecardservicestatemustbesettoIS.
NOTE
TheRPRLineModuleswor kinaMaster/Slaverelationship.Theactive
(Master)mustbeIS,andthestandby(Slave)mustintheIS,Standby‐Hot(IS,
S‐H)state.IfthemodulesareOut‐of‐Service,the spanshouldbedownand
thecardshouldnotparticipate inanyredundancy orring 
operation,nor
shoulditparticipateindatabasemirroring.
Tosetthecardservicestate,completethefollowingprocedure:
1. FromtheRPRLineModulemenu,select
Provisioning,andpressENTER.
FigureL‐4displaystheRPRLineModuleProvisioningmenu.
TID: HSV00001 Total Access 5000 System MM/DD/YY HH:MM
Unacknowledged Alarms: None Unit Number: 1
RPR Line Module: Active
1. Configuration
2. Provisioning
3. Status
4. Test
5. Alarms
6. Performance Monitoring
7. Event Log
Selection :
'?' - System Help Screen

ADTRAN TA 5000 Specifications

General

Brand	ADTRAN
Model	TA 5000
Category	Network Router
Language	English