Total Access 5000 Business Services Deployment Guide
A-4 65K510DEP08-1A
3. FromtheGigabitEthernetInterfaceConfigurationprompt,typelacp mode activeor
lacp mode passive,andpressENTERtoconfiguretheinterfaceforthedesiredLACP
mode.
4. Repeatsteps2to3toenableLACPforallactivegigabit‐ethernetinterfacesinthelink
aggregationgroup.
5. FromtheGigabitEthernetInterfaceConfigurationprompt,type
end,andpressENTERto
returntotheEnableprompt.
Configure Default Network Interface
Toconfigurethedefaultnetworkinterface,completethefollowingprocedure:
1. FromtheEnableprompt,type
configure terminal,andpressENTERtoaccesstheGlo‐
balConfigurationprompt.
2. FromtheGlobalConfigurationprompt,type
ethernet defaultinterface lag-
group 1/A/1
,andpressENTERtosetthedefaultnetworkinterfacetothenewlycreated
linkaggregationgroup.
3. FromtheGlobalConfigurationprompt,type
endandpressENTERtoreturntotheEnable
prompt.
Configure EVCs
Oncealinkaggregationgroupiscreated,itcanbeincludedintheTotalAccess5000cross
connects.TocreateanEVCandconnectittoalinkaggregationgroup,complete thefollowing
procedure:
1. FromtheEnableprompt,type
configure terminal,andpressENTERtogettotheGlo‐
balConfigurationprompt.
2. FromtheGlobal Configurationprompt,type
evc WORD,andpressENTERtocreateanEVC
withnameevc_name.
3. FromtheEVCI n terface Configurationprompt,type
s-tag <1-4094>,andpressENTER
tosettheS‐tagofthe EVC.
4. FromtheEVCI n terface Configurationprompt,type
connect men-port lag-group
<1/slot/port>
,andpressENTERtoconnectthedesiredlinkaggregationgrouptothe
EVC.
Thiscommandentryap pliestotheactiveGigESM,independentofwhich
GigESMisactuallyspecified,inanActive/Standbyconfiguration.
5. FromtheEVCI n terface Configurationprompt,type
connect men-port efm-group
<shelf/slot/group>
,andpressENTERtoconnecttheEFMbondinggrouptotheEVC.
TheEFMbond ing groupshe lf/slot/groupdesignationcanbeusedinlieuof
thegroupname.