Appendix L, RPR Provisioning - Central Office Terminal (COT) Node Provisioning
65K510DEP08-1A L-3
Central Office Terminal (COT) Node Provisioning
TheCOTNodeisprovisionedbysettingtheprovisioningontheRPRLineModule.
TheGigESMintheCOTNoderequiresnoprovisioningforthetimingsource
ortheHopCount.
Provision the RPR Line Module
Thissubsectiondetailsthefollowing information:
•RPRLineModuleProvisioningDefaults
• AccesstheRPRLineModule
•ProvisiontheRPRLineModuleServiceState
•ProvisiontheHub/Spoke
•ProvisiontheTiming
•ProvisionIGMPMulticastVLAN
RPR Line Module Provisioning Defaults
WhentheRPRLineModuleisinstalledinaTotalAccess5000shelf,theSCMqueriesthe
system(localandclusteredshelves)tosynchronizeitsdatabase.Nouserinterventionis
requiredforthisprocess.ProvisioningishandledwithoutuserentryifAuto‐Provisioningis
enabled.Otherwise,provisioningmustbeaccomplishedmanually
throughtheSCMmenu
system.
TableL‐2showsthe minimumlistoffactorydefaultsandvaluesthatareloadedafterinstal‐
lationandself‐test.Thesedefaultsandvaluesprovidetheminimumconfigurationforturnup
oftheRPRLineModule.
Table L-2. Default Provisioning Options
Provisioning Option Available Options Default Setting
CardServiceState
CardServiceState IS(InService);
OOS‐UAS(OutofService‐Unas‐
signed);
OOS‐MA(OutofService‐Mainte‐
nance)
OOS‐MA
Redundancy
Revertive Revertive;
NonRevertive
NonRevertive(dis‐
able)
RevertiveTimeout 15–65535seconds 15s
RPRProvisioning
KeepaliveTimeout(ms) 2–200milliseconds 5ms