Total Access 5000 Business Services Deployment Guide
G-4 65K510DEP08-1A
Remote Loopback Configuration
Toconfiguretheunittorespondto(enable)ortoignore(disable)toremoteloopback
commands,completethefollowingsteps:
1. FromtheEnableprompt,type
configure terminal,andpressENTERtoaccesstheGlo‐
balConfigurationprompt.
2. FromtheGlobalConfigurationprompt,type
interface t3 <shelf/slot/port>,and
press
ENTERtoaccesstheT3InterfaceConfigurationprompt.
3. FromtheT3InterfaceConfigurationprompt,performoneofthefollowing:
•Type
remote-loopback,andpress ENTERtoprovisiontheporttorespondtoremote
loopbackcommands.
•Type
no remote-loopback,andpressENTERtoprovisiontheporttoignoreremote
loopbackcommands.
4. FromtheT3InterfaceConfigurationprompt,type
end,andpressENTERtoreturntothe
Enableprompt.
Test Administrative Functions
TheTotalAccess5000CLIApplicationprompt,controlsboththelocalloopbackandBERT
functions.WhileintheApplicationprompt,thefollowingcommandscanbeissued:
•ViewthecurrentteststatusoftheDS3interfacebytyping
show test interface t3
<shelf/slot/port>
,andpressENTER
•CleartheteststatisticsoftheDS3interfacebytypingtest interface t3
<shelf/slot/port> clear
,andpressENTER
•Stopanytestinprogress(loopbackorBERT)bytypingno test interface t3
<shelf/slot/port>
,andpressENTER
Local Line Loopback Configuration
ToconfigurelocalDS3loopbacks,completethefollowingsteps:
1. FromtheEnableprompt,type
application,andpressENTERtoaccesstheApplication
prompt.
2. FromtheApplicationprompt,type
test interface t3 <shelf/slot/port> local
loopback line timeout <0-9999>
,andpressENTERtostartaDS3lineloopback.
•Theloopbacktimeoutisoptionalandcanbeleftofftheloopbackcommand
•TheDS3lineloopback canbestoppedbytypingno test interface t3
<shelf/slot/port>,andpressENTER
BERT Test Configuration
TheChannelizedDS3Multi‐Service3‐PortperformsBERTgenerationandtestingattheDS3
interfaces.ToconfiguretheDS3BERT,completethe followingsteps: