Appendix J, GigE Star Provisioning - Remote Terminal (RT) Provisioning
65K510DEP08-1A J-11
Provision the GE 4-Port Line Module
Thissubsectiondetailsthefollowing information:
•ProvisiontheGE4‐PortLineModuleServiceState
•ProvisiontheNetworkPorts
•ProvisiontheEthernetStar
•ProvisionforRedundancy
Provision the GE 4-Port Line Module Administration Status
TableJ‐2displaysthethreeadministrationstatesandshowstheequivalentServiceStatefrom
priorreleases.
Tosetthemoduleadministrationstate,completethefollowing:
1. FromtheTotalAccess5000Mainmenu,select
System CLI,andpressENTER.
2. FromtheCLImenu,select
CLI Command Entry,andpressENTER.
Thefollowingresponseiddisplayed:
Use EXIT to exit CLI session.
3. SelectYtoentertheCLIcommandinterface.
4. LoginagainusingthedefaultADM IN andPASSWORDoptions.TheCLIpromptis
displayed.
5. Type
enable,andpressENTERtoenabletheprivilegedcommands.
6. FromtheEnableprompt,type
configure terminal,andpressENTER.
7. FromtheGlobalConfigurationprompt,provisionthemoduleadministrationstateby
performingoneofthefollowingcommands:
•Type
no slot shutdown <shelf/slot>,andpressENTERtotakeaslotInService
•Typeslot
shutdown maintenance <shelf/slot>,andpressENTERtotakeaslot
OutofService,Maintenance
•Type
slot shutdown <shelf/slot>,andpressENTERtotakeaslotOutofService,
Unassigned
8. FromtheGlobalConfigurationprompt,type
interface gigabit-ethernet
<shelf/slot/port>
,andpressENTER.
Table J-5. GE 4-Port Line Module Administration States
Command Previous Description
no shutdown
InService
Inthe no shutdownstate,traffic
passesandalarmsaregenerated.
shutdown maintenance
OutofService,Main‐
tenance
Inthe
shutdown maintenance
state,trafficpassesbutnoalarmsare
generated.
shutdown
OutofService,Unas‐
signed
Inthe shutdownstate,notraffic
passesandnoalarmsaregenerated.