ADTRAN TA 5000 User Manual

Section 7, EoF Provisioning - Provisioning Summary
65K510DEP08-1A 7-3
Provisioning Summary
TocreateadatapathfromtheGigESMportontheTotalAccess5000toanEthernetporton
theNetVanta8044,completethefol lowing procedure:
1. ProvisiontheGE8 ‐PortLineModule.
Formoreinformation,referto“ProvisiontheGE8‐PortLineModule”onpage 7‐4.
2. Configurethe
subtendedhostinformation.
Formoreinformation,referto“ConfigureSubtendedHostInformation”onpage 7‐5.
3. CreateanEthernetVirtualCircuit(EVC)attheTotalAccess5000thatconnectsthe
GigabitEthernetportofthedefaultethernetinterface.
ThiscreatesthemappingoftheS‐taggeddata.Thisaccomplishesthefollowing:
•TheGigE
SMknowswheretosendthetaggedtrafficcominginfromthedefault
ethernetinterface
•TheGigESMpushestheavailabletagstoeachGE8‐PortLMandtoeachNetVanta
8044forthelocalNetVanta8044provisioning
Formoreinformation,referto“CreateanEVCCrossConnect”onpage 7‐6.
4. LogontotheNetVanta8044.
Formoreinformation,referto“LogOntotheNetVanta8044”onpage 7‐8.
5. CreatetheEVCattheNetVanta8044.
TheEVCisaconnectionbetweentwophysicalports.
Formoreinformation,referto“CreateanEVC”onpage 7‐9.
6. CreateamapattheNetVanta
8044thatinformstheunittoswitchdatafromagiv enUser
toNetworkInterface(UNI),ataminimum,toaparticularEVC,andviceversa.
Formoreinformation,referto“CreateanEVCMap”onpage 7‐12.
7. ProvisionpolicersintheNetVanta8044.
Formoreinformation,referto“ProvisionPolicers
intheNetVanta8044”onpage 7‐14.
8. ProvisionMACAddressLimitingandAging.
Forformoreinformation,referto“ProvisionMACAddressLimitingandAging”on
page 7‐17.
9. Disableanyunusedinterfaces.
Formoreinformation,referto“DisableUnusedNetVanta8044Interfaces”onpage 7‐18.

ADTRAN TA 5000 Specifications

General

Brand	ADTRAN
Model	TA 5000
Category	Network Router
Language	English