To Next Page

To Previous Page

Total Access 5000 Business Services Deployment Guide

6-22 65K510DEP08-1A

dscp <0-63>.Toremovethisattributefromthematchcriteria,typeno match

dscp

.ArangeofDSCPvaluescanbeenteredforthiscommand.

f. L2CP:Thisconfiguresthemaptopassonlylayer2controlprotocoltraffic.To

enable,type

match l2cp.Toremovethisfromthematchcriteria,typeno match

l2cp

4. FromtheEVC‐MapConfigurationprompt,enablethemapbytyping

no shutdown,and

press

ENTER.

5. FromtheEVC‐MapConfigurationprompt,type

end,andpressENTERtoreturntothe

Enableprompt.

6. Tosavethechangestonon‐volatilememory,type

write,andpressENTER.

7. FromtheEnableprompt,viewthenewmapbytypingshow evc-map WORD,andpress

ENTER.

ThiscommandalsodisplaystheEVCandUNIthatthemapisattached.

Oncethisprocessiscompleted,datacanberunthroughthesystem.Ifuntaggeddatais

sentintotheNetVanta800,theGigESMEthernetporttransmitsdatataggedwiththe

appropriateS‐tag.

Map Example

Thefollowingisasampleoutputoftheshowinterfacesmapcommandformap‐2010.

MyNV800#show evc-map my_test_map

Admin State : Enabled

EVC-map Status : Running - Enabled

Connected EVC : evc2010

Policer : None

Connected UNI : Ethernet 1/0/1

Match Traffic Type : Broadcast

Match Traffic Type : Multicast

MyNV800#

ADTRAN TA 5000 User Manual

Questions and Answers: