ADTRAN TA 5000 User Manual

Section 6, EoTDM Provisioning - Create an EFM Bonding Group
65K510DEP08-1A 6-7
Table6‐3displaysthelistofvariablesfortheEFMbondinggroup.
4. FromtheEFMConf igurationprompt,type
exit,andpressENTERtoreturntothe
ApplicationConfigurationprompt.
Verify Bonding Group Creation
Toverifythatthebondinggroupwascreated,anddeterminetheslotandgroupIDassigned
tothegroup,performoneofthefollowing:
•FromtheEnableprompt,type
show interfaces efm-group,andpressENTER toview
allEFMbondinggroupsintheTotalAccess5000
•FromtheEnableprompt,type
show table interfaces efm-group,andpressENTER
toviewatable(withlimitedEFMgroupinformation)
•FromtheEnableprompt,type
show efm-group 1,andpressENTERtoseethelinks
assignedtoallgroupsintheshelfalongwiththeprovisionedgrouprates
Table 6-3. EFM Bonding Group Variables
Syntax Description
WORD Enterthename(upto50alphanumericcharacterswithnospacesorspe‐
cialcharacters)ofthebondinggroup.
EFMlinks EntertheEFMlinkstoaddtothebondinggroup.Eachlinkmustbeinthe
slot/port:channelformat.
active‐links‐minimum Enterthenumberoflinksinthegrouprequiredtoprovide
theupstream
anddownstreamrates.Anyadditionallinkswillbehotstandbylinks.
upstream/downstream Thevaluesaftertheupstreamanddownstreamkeywordsarethe
upstreamanddownstreamratesforthebondinggroup.

ADTRAN TA 5000 Specifications

General

Brand	ADTRAN
Model	TA 5000
Category	Network Router
Language	English