Allen-Bradley E300 - User-Defined Screen 3

116 Rockwell Automation Publication 193-UM015E-EN-P - October 2015
Chapter 4 System Operation and Configuration
User-defined Screen 2 – Parameter 2
User-defined Screen 2 - Parameter 2 (Parameter 431) is the E300 parameter
number to display for the second parameter in user-defined screen 2. You can
select one of the 560 available E300 relay parameters.
Table 117 - Screen 2 - Parameter 2 (Parameter 431)
User-defined Screen 3
User-defined Screen 3 – Parameter 1
User-defined Screen 3 - Parameter 1 (Parameter 432) is the E300 parameter
number to display for the first parameter in user-defined screen 3. You can select
one of the 560 available E300 relay parameters.
Table 118 - Screen 3 - Parameter 1 (Parameter 432)
User-defined Screen 3 – Parameter 2
User-defined Screen 3 - Parameter 2 (Parameter 433) is the E300 parameter
number to display for the second parameter in user-defined screen 3. You can
select one of the 560 available E300 relay parameters.
Table 119 - Screen 3 - Parameter 2 (Parameter 433)
Default Value 3
Minimum Value 0
Maximum Value 560
Parameter Type UINT
Size (Bytes) 2
Scaling Factor 1
Units 
Default Value 51
Minimum Value 0
Maximum Value 560
Parameter Type UINT
Size (Bytes) 2
Scaling Factor 1
Units 
Default Value 52
Minimum Value 0
Maximum Value 560
Parameter Type UINT
Size (Bytes) 2
Scaling Factor 1
Units 