Allen-Bradley E300 User Manual

502 Rockwell Automation Publication 193-UM015E-EN-P - October 2015
Chapter 8 Metering and Diagnostics
Table 444 - Starts Counter (Parameter 29)
Starts Available
Starts Available (Parameter 30) reports the number of starts currently available
based on the blocked start settings and the actual motor starting events.
Table 445 - Starts Available (Parameter 30)
Time to Start
Time to Start (Parameter 31) reports the amount of time remaining until a new
start can be issued. If the Time to Start time has elapsed, this parameter reports
zero until the next Blocked Start trip occurs.
Table 446 - Time to Start (Parameter 31)
Year
Year (Parameter 32) reports the year in the virtual real-time clock of the E300
relay.
Default Value 0
Minimum Value 0
Maximum Value 65535
Parameter Type UINT
Size (Bytes) 2
Scaling Factor 1
Units
Default Value 0
Minimum Value 0
Maximum Value 120
Parameter Type USINT
Size (Bytes) 1
Scaling Factor 1
Units
Default Value 0
Minimum Value 0
Maximum Value 3600
Parameter Type UINT
Size (Bytes) 2
Scaling Factor 1
Units Seconds

Allen-Bradley E300 Specifications

General

Type	Electronic Overload Relay
Mounting	DIN Rail or Panel Mount
Protection Class	IP20
Voltage Range	24…690 V AC/DC
Communication Options	EtherNet/IP, DeviceNet
Protection	Overload, phase loss, ground fault
Operating Temperature	-20°C to 60°C