Rockwell Automation Publication 193-UM015E-EN-P - October 2015 501
Metering and Diagnostics Chapter 8
Expansion Analog Module ID
Expansion Analog Module ID (Parameter 27) identifies which specific
Expansion Analog Modules are present on the Expansion Bus of the E300 relay
system.
Table 442 - Expansion Analog Module ID (Parameter 27)
Operating Time
Operating Time (Parameter 28) represents the number hours that a motor has
been running. This value can be reset to zero using the Clear Command
(Parameter 165) function Clear Operating Statistics.
Table 443 - Operating Time (Parameter 28)
Starts Counter
Starts Counter (Parameter 29) represents the number of times a motor has been
started. This value can be reset to zero using the Clear Command (Parameter
165) function Clear Operating Statistics.
Bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 Function
00Unknown
Analog Module 101None
1 0 193-EXP-AIO-31
00 Unknown
Analog Module 201 None
1 0 193-EXP-AIO-31
00 Unknown
Analog Module 301 None
1 0 193-EXP-AIO-31
00 Unknown
Analog Module 401 None
1 0 193-EXP-AIO-31
Default Value 0
Minimum Value 0
Maximum Value 65535
Parameter Type UINT
Size (Bytes) 2
Scaling Factor 1
Units Hours
To Next Page
Loading...
