Allen-Bradley E300 - Clear Kvah; Clear Max. Kw Demand; Clear Max Kvar Demand; Clear Max Kva Demand

484 Rockwell Automation Publication 193-UM015E-EN-P - October 2015
Chapter 7 Commands
Clear kVAh
When the Clear kVAh command is issued, the E300 relay sets the following
parameters to a value of zero (0):
• kVAh x 10
9
(Parameter 100)
• kVAh x 10
6
(Parameter 101)
• kVAh x 10
3
(Parameter 102)
• kVAh x 10
0
(Parameter 103)
• kVAh x 10
-3
(Parameter 104)
Clear Max. kW Demand
When the Clear %TCU command is issued, the E300 relay sets Max kW
Demand (Parameter 106) to a value of zero (0).
Clear Max kVAR Demand
When the Clear %TCU command is issued, the E300 relay sets Max kVAR
Demand (Parameter 108) to a value of zero (0).
Clear Max kVA Demand
When the Clear %TCU command is issued, the E300 relay sets Max kVA
Demand (Parameter 110) to a value of zero (0).
Clear All
When the Clear All command is issued, the E300 relay sets the following
parameters to a value of zero (0):
• % The
rmal Capacity Utilized (Parameter 1)
• Operating Time (Parameter 28)
• Starts Counter (Parameter 29)
• kWh x 10
9
(Parameter 80)
• kWh x 10
6
(Parameter 81)
• kWh x 10
3
(Parameter 82)
• kWh x 10
0
(Parameter 83)
• kWh x 10
-3
(Parameter 84)
• kVARh Consumed x 10
9
(Parameter 85)
• kVARh Consumed x 10
6
(Parameter 86)