Allen-Bradley E300 - Enable Option Match Protection Trip (Parameter 186)

To Next Page

To Previous Page

Rockwell Automation Publication 193-UM015E-EN-P - October 2015 81

System Operation and Configuration Chapter 4

Enable Option Match Protection Trip (Parameter 186)

To enable the Option Match feature to cause a protection trip in the event of an

option mismatch, place a (1) in bit position 8 of Parameter 186 (Control Trip

Enable). You can select the specific option match features to cause a protection

trip in Parameter 233 (Option Match Action).

Table 30 - Enable Option Match Protection Trip Bit Function Detail— Control Trip Enable

(Parameter 186)

Bit

1514131211109876543210 Function

X Test Trip Enable

XPTC Trip Enable

X DeviceLogix Trip Enable

X Operator Station Trip Enable

X Remote Trip Enable

X Blocked Start Trip Enable

X Hardware Fault Trip Enable

X Configuration Trip Enable

X Option Match Trip Enable

X Feedback Timeout Trip Enable

X Expansion Bus Trip Enable

Reserved

X Nonvolatile Memory Trip Enable

XReady

Reserved

Other manuals for Allen-Bradley E300