Allen-Bradley E300 User Manual

Rockwell Automation Publication 193-UM015E-EN-P - October 2015 557
DeviceLogix™ Functionality Chapter 9
by combining these Boolean operations with any of the available I/O. The inputs
and outputs used to interface with the logic can come from the network or from
the E300 digital inputs and output relays. There are many reasons to use the
DeviceLogix functionality, but some of the most common are listed below:
• Increased system reliability
• Improved diagnostics and reduced troubleshooting
• Operation independent of PLC or Network status
• Continue to run process in the event of network interruptions
• Critical operations can be safely shut down through local logic
S
ee
publication RA-UM003 for more information on the capabilities of
Devic
eLogix functionality and how to use the DeviceLogix program editor

Allen-Bradley E300 Specifications

General

Type	Electronic Overload Relay
Mounting	DIN Rail or Panel Mount
Protection Class	IP20
Voltage Range	24…690 V AC/DC
Communication Options	EtherNet/IP, DeviceNet
Protection	Overload, phase loss, ground fault
Operating Temperature	-20°C to 60°C