Allen-Bradley E300 User Manual

732 Rockwell Automation Publication 193-UM015E-EN-P - October 2015
Index
second 504
security configuration policy
90
security policy
88
sensing module
description
21
sensing module ID
499
setting IP network address
562
assign network parameters via BOOTP/ DHCP
utility
563
EtherNet/IP node address selection switches
562
short-circuit ratings 56
simplified wiring
overview
18
specifications
623
accuracy
629
electrical
623
electromagnetic compatibility 627
environmental
626
protection
628
stall protection 327
start inhibit protection
433
starter assembly.See
starts available
502
starts counter
501
storage
27
system configuration
77
system operation
77
T
terminals 48
control module
50
expansion analog module
53
expansion digital module 52
expansion power supply
55
sensing module
48
terminology 15
test mode trip
441
test trip
427
text notification
608
thermal-based protection
26
thermistor protection
428
time to reset
488
time to start
502
time to trip
488
total apaprent power
553
total apparent power
519
total power factor
520, 553
total reactive power
517, 552
total real power
516, 552
trip
reset
620
trip and warning screens 76
trip history
539
trip reset
477
trip snapshot
551
L1-L2 voltage
551
L2-L3 voltage
551
L3-L1 voltage
552
total apparent power
553
total power factor
553
total reactive power
552
total real power
552
trip/warn LED
troubleshooting
618
troubleshooting procedure 620
trip/warning history
539
trip history
539
warning history
545
troubleshooting 617
advisory LEDs
617
communication module
608
power LED
617
trip reset 620
trip/warn LED
618
trip/warn LED procedure
620
two-speed starter operating modes 256
custom
305
local I/O, three-wire control
287
local I/O, two-wire control
278
local I/O, two-wire with feedback 282
network
257
network and local I/O, three-wire control
301
network and local I/O, two-wire control 296
network and operator station
290
network with feedback
261
operator station 266
operator station with feedback
271
U
underload protection 333
undervoltage protection
367
unpacking
27
update rate
122
updating firmware
612
user-defined screens
114
V
view and configure parameters 574
editing
575
viewing
574
voltage
average L-L
511
average L-N 512
imbalance
513
L1-L2
510
L1-N 511
L2-L3
510
L2-N
512
L3-L1 511
L3-N
512
voltage- and power-based protection
25
voltage imbalabce protection
373
voltage imbalance
513

Allen-Bradley E300 Specifications

General

Type	Electronic Overload Relay
Mounting	DIN Rail or Panel Mount
Protection Class	IP20
Voltage Range	24…690 V AC/DC
Communication Options	EtherNet/IP, DeviceNet
Protection	Overload, phase loss, ground fault
Operating Temperature	-20°C to 60°C