Safety-9
B. The equipment shall continue to operate as intended after the test. No
degradation of performance or loss of function is allowed below a performance
level specified by the manufacturer, when the equipment is used as intended.
The performance level may be replaced by a permissible loss of performance.
During the test, degradation of performance is however allowed. No change of
actual operating state or stored data is allowed. If the minimum performance
level or the permissible performance loss is not specified by the manufacturer,
either of these may be derived from the product description and documentation
and what the user may reasonably expect from the equipment if used as
intended.
C. Temporary loss of function is allowed, provided the function is self-recoverable or
can be restored by the operation of the controls.
Harmonic current emissions:
EN 61000-3-2: 2006 +A1:2009 A2:2009
(Class A equipment)
No limits apply to this equipment with an active input power under 75 W.
• LVD:EN 61010-1: 2010 (Pollution Degree 2)
• RoHS:EN 50581: 2012 (Category 9)
4. Authorized representative
Name: Murray Coleman
Head of Customer Service EMEA
ANRITSU EMEA Ltd.
Address, city: 200 Capability Green, Luton
Bedfordshire, LU1 3LU
Country: United Kingdom
To Next Page
Loading...
