Safety-8
CE Conformity Marking
Anritsu affixes the CE conformity marking on the following product(s) in accordance with the
Decision 768/2008/EC to indicate that they conform to the EMC, LVD, and RoHS directive of
the European Union (EU).
1. Product Model
Model:MT8852B Bluetooth Test Set
2. Applied Directive
EMC: Directive 2014/30/EU
LVD: Directive 2014/35/EU
RoHS:Directive 2011/65/EU
3. Applied Standards
• EMC:Emission:EN 61326-1: 2013 (Class A)
Immunity:EN 61326-1: 2013 (Table 2)
*: Performance Criteria
A: The equipment shall continue to operate as intended during and after the test.
No degradation of performance or loss of function is allowed below a performance
level specified by the manufacturer, when the equipment is used as intended.
The performance level may be replaced by a permissible loss of performance. If
the minimum performance level or the permissible performance loss is not
specified by the manufacturer, either of these may be derived from the product
description and documentation and what the user may reasonably expect from
the equipment if used as intended.
Performance Criteria*
IEC 61000-4-2 (ESD) B
IEC 61000-4-3 (EMF) A
IEC 61000-4-4 (Burst) B
IEC 61000-4-5 (Surge) B
IEC 61000-4-6 (CRF) A
EC 61000-4-8 (RPFMF) A
IEC 61000-4-11 (V dip/short) B,C
To Next Page
Loading...
