9 Frequently asked questions (FAQ)
• When using three syncgroups the correct cabling would look as follows:
• Active stereo: when using external synchronization (video) the correct cabling
would look as follows:
• Active stereo: when using external synchronization (TTL) the correct cabling would
look as follows:
Synchronization failed in TRACKPACK systems (discontinued)
Here we have to distinguish between hardware and software issues:
1. Check the cabling (hardware issue):
• Please double-check whether the cables are connected correctly and that they
are not loose.
• Please make sure that the cables themselves are not damaged.
• Take care of using the correct ports:
200
To Next Page
Loading...
