DL205 User Manual, 7th Edition Rev. D
x
Table of ContentsTable of Contents
Chapter 10: F2-08DA-1, 8-Channel Analog Current Output
Module Specifications 10–2
Firmware Requirements: 10–2
Analog Output Configuration Requirements 10–2
Output Specifications 10–3
General Specifications 10–3
Special Placement Requirements (DL230 and Remote I/O Bases) 10–4
Connecting and Disconnecting the Field Wiring 10–5
Wiring Guidelines 10–5
User Power Supply Requirements 10–5
Wiring Diagram 10–6
Load Range 10–6
Module Operation 10–7
Channel Scanning Sequence for a DL230 CPU (Multiplexing) 10–7
Channel Scanning Sequence for DL240, DL250-1, and DL260 CPUs
(Pointer Method) 10–8
Understanding the Output Assignments 10–8
Channel Select Outputs 10–9
Analog Data Bits 10–10
Output Enable 10–10
Module Resolution 10–10
Writing the Control Program 10–11
Calculating the Digital Value 10–11
The Conversion Program 10–11
Reading Values Pointer Method and Multiplexing 10–12
Pointer Method for the DL240, DL250-1 and DL260 CPUs 10–12
Writing Data (Multiplexing Example) 10–14
Write Data (Multiplexing Example) Continued 10–15
Sending Data to One Channel 10–16
Analog and Digital Value Conversions 10-16
Chapter 11: F2-08DA-2, 8-Channel Analog Voltage Output
Module Specifications 11–2
Firmware Requirements: 11–2
Output Specifications 11–3
General Specifications 11–3
To Next Page
Loading...
