AutomationDirect DL205 Manual

DL205 Analog Manual, 7th Edition Rev. D
12-2
Chapter 12: F2-02DAS-1, 4-20mA Isolated 2-Channel Analog Current Output
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
Module Specifications
The F2-02DAS-1 Analog Output module provide several
hardware features:
• Analog outputs are isolated from channel to channel
and channel to PLC logic.
• The module has a removable terminal block so the
module can be easily removed or changed without
disconnecting the wiring.
• All channels can be updated in one scan if either a DL240,
a DL250-1 or a DL260 CPU is used in the PLC.
• Outputs are sourced through external loop supply.
• Loop power supply requirements:
18–32 VDC
Firmware Requirements:
• To use this module, DL230 CPUs must have firmware
version 1.7 or later.
• To use the pointer method for writing values, DL240 CPUs
require firmware version 2.9 or later.
• DL250 CPUs require firmware version 1.30 or later.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
b
C
D
+V1
+I1
N/C
+V2
+I2
0V1
–I1
NC
0V2
–I2
F2-02DAS-1
OUTANALOG
2CH
F2-02DAS-1
12-32VDC
ANALOG OUT
4-20mA
+V
1
+I
1
N
/C
+V
2
+I
2
0
V
1
–
I
1
N
C
0
V
2
–
I2
F
2-02DA
S
-1
O
UT
F
2-02DA
S
-
1
1
2-
3
2VD
C
A
NAL
OG
OUT
4-
20
m
A
A
NAL
OG
A
2C
H
F2-02DAS-1

AutomationDirect DL205 Specifications

General

Brand	AutomationDirect
Model	DL205
Category	Controller
Language	English