DL205 Analog I/O Manual, 7th Edition Rev. D
1-2
Chapter 1: Getting Started
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
Introduction
The Purpose of this Manual
This manual shows how to select and install analog input and analog output modules. It also
shows several ways to use the analog data in a PLC program. If you understand the DL205
instruction set and system setup requirements, this manual will provide the information needed
to install and use the analog modules. This manual is not intended to be a tutorial on analog
signal theory, but rather a user reference manual for the DL205 Analog I/O modules.
Supplemental Manuals
A copy of the DL205 User Manual (D2-USER-M) will be helpful when working with the
analog modules. The DL205 User Manual is not absolutely necessary, but it does provide
detailed descriptions of the instructions used to acquire the analog data. The User Manual also
provides a more thorough description of how the I/O points are assigned to the module. This
is all the material necessary to quickly understand the DL205 Analog I/O modules.
Technical Support
We strive to make our manuals the best in the industry. We rely on your feedback to let us
know if we are reaching our goal. If you cannot find the solution to your particular application,
or, if for any reason you need technical assistance, please call us at:
770–844–4200
Our technical support group will work with you to answer your questions. They are
available Monday through Friday from 9:00 A.M. to 6:00 P.M. Eastern Time. We also
encourage you to visit our web site where you can find technical and non-technical
information about our products and our company.
http://www.automationdirect.com
If you have a comment, question or suggestion about any of our products, services,
or manuals, please fill out and return the Suggestions card that was included with this
manual.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
b
C
D
To Next Page
Loading...
Need help?
General
