Page 150 – 7. Cues
TitanUniversal_Man_v10_QU.doc 15 March 2016
programming, because any attributes in the programmer will override
playbacks.
Fixtures which are in the programmer are shown in mid blue on the
touch buttons. Attributes in the programmer (the things you have
changed) are shown in cyan on the attribute displays.
Firing a cue does not place the values from the cue in the
programmer (although the Include function lets you do this, see
section 7.3.4 on page 157).
7.1.2 Creating a cue
1> Press Clear to clear the programmer. This ensures that you are
starting with a clean slate.
2> Set up the look using the fixtures. You can save shapes in a
cue. Remember that only fixtures which are selected or have
been modified will be saved in the cue (in Record by Fixture
mode).
3> Press the Record button.
4> Press the Swop button of an empty Playback to record the cue.
The handles where you can record the cue will flash. You can
also record a cue onto a touch button in the Playbacks window.
5> Press Clear to clear the programmer. Repeat from 2 to program
more cues.
Other useful things to know about recording cues:
• Cues can be recorded into the playback faders, the
macro/executor buttons and the onscreen Playbacks window.
• [Record Mode] lets you select Record By Fixture (all attributes
of any modified or selected fixture are saved), Record By
Channel (only modified attributes are saved), Record Stage (all
fixtures with a non-zero dimmer channel are saved) or Quick
Build (see next section).
• Record By Channel is useful if you want to layer multiple cues
to create an effect.
• If you are recording a lot of cues, you can press the Menu Latch
button to keep the Record Cue menu active. Press Exit to leave
Record Cue mode.
• The bottom of the screen shows a legend for the playback. To
set this, press [Set Legend], then the playback Swop button (or
the touch select button), then enter a legend on the keyboard.
Press Enter to store it.
• A Static Playbacks workspace is available to show the contents
of the macro/executor buttons and (on the Tiger Touch) the 10
static playback faders.
7.1.3 Quick Build cues
Setting [Record Mode] to Quick Build allows you to build a cue from
existing playbacks or palettes (you can also use the Include function
to do this).
To Next Page
Loading...
