4. Controlling dimmers and fixtures - Page 93
TitanUniversal_Man_v10_QU.doc 15 March 2016
2> Press the grey Group button (top right of the numeric keys)
then [Record Group]. You can also press Record then the Group
button.
3> Use softkey A to enter a number for the group, or B [Provide a
legend] to set a legend.
4> Touch an empty Group button, or press the grey button of a
fader handle where you want to store the group, or press C
[Store] to store as a numbered group.
5> Press Clear then repeat from 1 to store other groups.
• You can also press the Avo button and the Group button to go
directly to the Record Group menu, or on the screen touch the
button twice to use Quick Record – on the first touch the button
will turn red with a +, on the second touch the group will be
recorded.
• To select all the fixtures/dimmers in a group, just press the
button for the group.
• The order in which you originally selected the fixtures when
creating the group is also stored. This takes effect when you
use the last fixture – next fixture functions described in the
next section, and when you use Shapes, Fan mode and Fixture
Overlap functions. You can change this later, see the next
section.
You can override the selection order while recalling a group by
holding down the group button and using the softkey options.
• You can also recall a group by its number:
1> Press the grey Group button.
2> Type in the number of the group you want to recall.
3> Press [Recall Group].
• The Group button also gives you facilities on the softkeys to edit
and delete groups.
Auto Groups
When patching multiple fixtures, the console automatically creates
groups for you. A fixture type group is created which contains all
fixtures of the same type (for example, [All Mac 2000]). Another
group is created each time you patch a quantity of fixtures (for
example, [4 BB4].) This function can be turned off using [Auto
Groups] in the User Settings.
4.3.2 Fixture Order and Fixture Layout in groups
Fixtures in a group are stored with a selection order, which is used
with Shapes, Fan, and Overlap. You can also store a 2D position
layout for fixtures, giving the actual physical location of fixtures for
use with the Pixel Mapper effects.
To change fixture order:
1> Press [Edit Times].
2> Select the group you want to edit.
To Next Page
Loading...
