7. Cues - Page 153
TitanUniversal_Man_v10_QU.doc 15 March 2016
spotlight, but they are also programmed into some colour
washes, you probably want the spotlight cue to take priority
over the colour washes. See section 7.6.1 on page 167.
7.2.3 Changing playback pages
You change playback pages using the +1 and -1 buttons to the right
of the playback faders. You can also touch the 'Pages' roller graphic
and enter a page number.
• If you have stored cues on the touch select buttons, you select
different pages using the Playbacks page touch buttons.
• Playbacks which are fired when you change page remain active.
If you want to fire a cue on a fader which is already up from a
previous page, lower the fader to zero then raise it again. The
cue from the previous page will stop and the cue from the new
page will fire.
• If you return to a page with an active playback, the fader will
not resume control of the playback until it matches the current
level of the playback. This prevents the playback level jumping
when the fader is first moved. If a playback is active from
another page the display area is purple and shows the page
number at the top in light blue. You can change this behaviour
using the [Playback Paging] user setting, see section 13.1.3 on
page 277 .
• You can set a legend for each playback page. The legend is
shown on the ‘Pages’ roller on the screen. Use [Set Legend]
from the main Program menu then [Page Legends]. While in
this menu you can change the page to set legends for different
pages. The 20 executor buttons on the top right of the console
can be paged using two of the macro buttons. The page change
macros are part of the fixture library; if you do not see the
macros, download and install the latest library.
7.2.4 Viewing active playbacks
The Active Playbacks window shows details of which playbacks are
active. When you have a number of layered playbacks with different
effects, this provides an easy way to see which playback is causing
which effect. Each button shows the playback legend, which page
they are from and which attributes are affected. To show the window
press Window Open, [Open Workspace Window], [Active Playbacks].
To Next Page
Loading...
