13. User Settings and other options - Page 233
TitanUniversal_Man_v10_QU.doc 15 March 2016
13. User Settings and other options
The console has a large number of options to help you set it up just
the way you like it. Commonly used options can be set from the User
Settings menu which is available on a softkey when you hold down
the Avo button.
In this chapter there is also information on how to upgrade the
application software.
13.1 The System menu
The System menu is accessed by holding Avo and pressing Disk.
Some consoles are also fitted with a key switch or mode switch to
select System mode.
The options in this menu are separated from the other options on the
console because you would normally only change them occasionally,
or because they can have serious effects on the way the console
works and you wouldn’t want to change them accidentally.
When the console is in System mode, playback control,
preset controls and programming buttons are all
disabled.
13.1.1 TitanNet Security
This option sets how the console communicates with other Titan
devices as a backup console. See section 11.6 for information about
backup.
13.1.2 Network Settings
This option sets up networking (Ethernet) parameters for the console.
See section 15 for details.
13.1.3 User Settings
The User Settings menu may also be accessed from Program mode:
hold down the Avo Shift button and press [User Settings]. See section
13.5.
13.1.4 Key Profiles
Allows you to modify the functions of some buttons. See section 13.3.
13.1.5 Wipe
The Wipe menu erases the current show. This is the same as the
[New Show] option on the Disk menu, but is provided here for old
fashioned Avolites users who are used to it being on the System
menu.
The [Wipe Visualiser Patch] option will erase all fixtures from the
visualiser without affecting the current show.
To Next Page
Loading...
