18. Titan Commands quick reference - Page 299
TitanUniversal_Man_v10_QU.doc 15 March 2016
18. Titan Commands quick reference
Please note that some commands may require [Enter] to complete
the command. In this reference [Enter] has always been omitted for
clarity.
[] means a physical key on the console.
<> means an item handle (playback handle or fixture handle)
The available keys may differ depending on which console you are
using. Normally the function will be available as a macro if the key is
not present on your specific console.
Some of the keys in this guide have changed names and so here is a
list of the old key names and their new equivalents.
Old Name New Name
Connect Cue
SET TIME
18.1.1 Fixtures
[Fixture] 1 [THRU] 10
Select fixtures 1 through to 10.
[Fixture] 1 [THRU] 10 [AND] 20 [AND] 25
Select fixtures 1 to 10 and 20, 25
[Fixture] 1 [THRU] 10 [AND] [.]2
Select the second cell of fixtures 1 to 10.
[Fixture] 1 [THRU] 10 [AND] [.]2
Select the second cell of fixtures 1 to 10.
[Fixture] 5 [@] [@]
Put fixture 5 at full intensity.
[Fixture] 1 [THRU] 60 [@] 75
Put fixtures 10 to 60 at 75% intensity.
[Group] 2 [@] [@]
Put group 2 at full intensity.
[Group] 2 [@] 75
Put group 2 at full intensity.
Celled Fixtures (Sub Fixtures)
[.] m
Select cell m in the selected fixtures.
[.]
Select all the cells in the selected fixtures.
n [.]
To Next Page
Loading...
