8. Chases - Page 181
TitanUniversal_Man_v10_QU.doc 15 March 2016
8.6.3 Chase Options – Effects
All options in this section are described in the cues chapter.
8.6.4 Chase Options - Release
Release Mask and Release Time are described in the cues chapter.
Cue Release: allows you to create an overlay chase with gaps in it
where the fixtures will return to their previous state. For example you
could create a chase where every alternate cue sets the fixtures to
white, with the in between cues being blank. If this option is on, the
fixtures will bump to white then return to the colour set from a
previous look.
8.6.5 Renumber All Cues
This option is only available on the softkeys, not the option screen.
This will renumber all the cues in the chase starting from 1.
To Next Page
Loading...
