Page 240 – 13. User Settings and other options
TitanUniversal_Man_v10_QU.doc 15 March 2016
If the console software is running, you may have to press Esc to
unlock the keyboard before the shortcuts will work.
If none of the above works, the second solution is reinstall the
graphics drivers.
1. Press F8 on start up and enable VGA MODE (use an external
keyboard, or the Zoom/Focus/Iris attribute button is also mapped to
F8 – see section 1.1.1).
2. In Tools, Folder Options, View - enable Show hidden files and
folders.
3. In Control panel, System, Hardware, Device Manager, Display
Adapters - right click on 945GME and update driver.
4. Select the driver to install as C:\Windows\Inf\iegd.inf.
13.3 Show Library window
The Show Library window collects all the information about your show
into a single place. It is mainly used to transfer programming when
importing between different shows, but can also be used to move
items around within your show.
13.3.1 Show Library tab
The Show Library lists all programmed elements of your show
including fixture patch, fixture groups, palettes, playbacks, macros
and workspaces. Use the buttons down the left hand side to filter
what types of information are displayed.
To Next Page
