Page 36 – 2. Setting up and using the console
TitanUniversal_Man_v10_QU.doc 15 March 2016
To record a macro:
1> Press the Macro button (above keypad)
2> Select [Full Speed] or [Real Time].
3> Press [Record]
4> Press an empty Macro button on the panel, or an empty button
in the Macro window on the screen. Recording starts. The
Insert/Macro button flashes during recording.
5> Press the sequence of buttons you want to record.
6> Press Record Macro to finish recording.
To play back the macro, just press or touch the button where you
recorded the macro. The macro will repeat all your button presses,
with correct timings if you selected Real Time mode.
2.3.9 Locking the console
You can place a simple lock the console controls to prevent people
fiddling with it while you’re not looking. Hold down Avo and press
[Lock], then type a password (numbers or letters). To unlock, enter
the password again, or restarting the console will also unlock it. This
is not a high-security lock, it’s just to prevent idiots messing with it.
While the console is locked, all functions are disabled except the DMX
outputs and currently running playbacks.
2.3.10 Keyboard shortcuts
Many features of the console can be controlled by shortcuts on the
keyboard. These are especially useful when using Titan Mobile or
Titan Simulator.
The Titan application “captures” the keyboard on start up, meaning
that if you try to use other applications at the same time they will not
receive keypresses. Pressing Break on the keyboard releases the
keyboard for other applications but disables all text entry for Titan
including the shortcut keys; changing menus will reconnect the
keyboard to Titan.
Shortcuts are shown on the next page.
To Next Page
Loading...
