Page 294 – 17. Release notes
TitanUniversal_Man_v10_QU.doc 15 March 2016
9. Numeric fields auto open keyboard
Editing numeric items such as fade times would cause the keyboard
to auto open which was unnecessary given that numeric values can
(and usually would) be input from the numeric pad. This has
therefore been changed so that the keyboard no longer automatically
opens for numeric fields.
10. Set cuelist notes from cell
It is now possible to input notes for a cuelist cue directly by touching
the associated notes cell in playback view.
11. Cue linking options
When selecting link or link offset cells in cuelist playback view there
are two new submenus to make setting the associated options easier.
12. Record tracking mode
It is now possible to set the tracking mode prior to recording via a
softkey in the record menu.
13. TNP clock sync warning
The software will now prompt if the TNP clock sync has been lost.
This would indicate there may be significant problems with the
network.
14. Additional Programs
Icons and new options have been added to the Tools menu. Notably
'Log Viewer Pro' provides an easy way to get to the log viewer and
'TeamViewer' for remote assitance. Both options are for support.
15. Record master flashes available handles
When assigning masters the LED on available handles will now flash.
16. Patch to handle restrictions
It is now possible to patch fixtures on playback faders and executors.
17.1.4 Changes in v10.0
1. Open Workspace Window menu sorted alphabetically
The Open Workspace Window menu softkeys are now sorted
alphabetically.
2. Master numeric entry
Numeric entry for all relevant masters is now restricted to the
maximum level set for the particular master. If a value higher than
the maximum is applied, the master will go to its maximum level.
This is to avoid the issue where it would not be possible to regain
fader control until a new value within the maximum range was set
numerically or tapped (where appropriate).
3. Legacy Visualiser
With the integration of Capture the old Visualiser has been changed
to 'Legacy Visualiser'.
To Next Page
Loading...
