17. Release notes - Page 293
TitanUniversal_Man_v10_QU.doc 15 March 2016
33. Range DMX Line Assignment
It is now possible to assign a number of Art-Net and sACN universes
to lines automatically. Selecting an sACN or Art-Net node now
reveals [Universe] and [Quantity] softkeys. Inputting a universe
start address and a quantity and then selecting a line will
automatically add to multiple lines sequentially from the line selected
incrementing the universe by one each time according to the quantity
value.
17.1.3 Improvements in v10.0
1. Minimum palette mode
An new user setting has been added called 'Minimum Palette Mode'
which determines the limits of the automatic palette type when
recording. Options are Global/Shared/Normal. When set to Global if
identical values are detected for all fixtures selected it will default to
Global. When set to Shared identical values for all fixtures will
default to shared. When set to Normal identical values will default to
normal. This is useful where the automatic selection was not
desirable, particularly in the case of global.
2. Master display refresh
The display refresh rate for masters has been increased for smoother
UI feedback when adjusting a master level.
3. Highlight wheel select softkey
When wheel control is not level the softkey is now highlighted in blue
to help make it clear which mode the wheels are in.
4. Patch view highlight during selection
Drag selecting fixtures in patch view while in the patch menu now
highlights during selection so you can see exactly what you are
selecting.
5. Set list re-run
Pressing the play button in a set list now restarts the current track
including any macros, workspace shortcuts and page changes.
6. Button styling
Various buttons including softkeys, toggle switches, context menu
and window appearance options have been restyled to make it clearer
and easier to see when certain items have been selected/enabled or
switched on/off etc. Where available, the window title bar context
menu popup now also animates on opening.
7. Tooltips
Tooltip help prompts have been added to many of the touch options.
Wherever available an 'i' inside a circle will be shown. Touching this
or anywhere on the option title will reveal a popup with information
about the particular setting. Touch again anywhere to close.
8. Reports include sub fixture cells
Previously patch reports showed all the cells of a multi-cell fixture
which was unhelpful. Reports now only show the master fixture.
To Next Page
Loading...
