13. User Settings and other options - Page 247
TitanUniversal_Man_v10_QU.doc 15 March 2016
Filter Relevant Palettes: sets whether palettes which do not apply
to the selected fixtures will be greyed out.
Master Palette Time: Sets the default fade time to be used when
recalling palettes live. See 11.1.11.
Master Palette Overlap: Sets the defaul
t overlap to be used when
fading palettes.
Record Nested Palettes: If enabled, palettes containing other
source palettes will be updated when you change the source palette.
Preset Palettes: This is the same as the option in the Patching
section, see above.
13.5.8 Release
These settings can also be changed from the Release menu.
Release To Home: If enabled, when the last playback is released
fixtures will return to home values. If disabled, LTP channels will
remain set.
Master Release Time: Sets the default release time.
13.5.9 Clear
These settings can also be changed from the Clear menu.
Auto Reset Mask: When enabled, the Clear Mask will reset to
include all attributes after every clear.
Zero Preset Fader Levels: When enabled, intensity levels set on
fixtures patched to fader handles will be zeroed when Clear is
pressed. If disabled the levels will remain set but will be removed
from the programmer.
Release to Playback Values: If enabled, LTP channels will release
to the values set in the last playback when Clear is pressed. If
disabled, LTP channels will not change when Clear is pressed.
Clear Cue Times: If enabled, resets cue times in the programmer to
defaults when Clear is pressed. If disabled, cue times set in the
programmer will remain.
13.5.10 Effects
Swop Shapes: Sets how shapes react to Swop mode.
[All Shapes] – All running shapes from other playbacks are stopped
[Intensity Shapes] – Only intensity shapes from other playbacks stop
Shape Behaviour: sets whether Key frame shapes will overlay all
other values or will work in LTP mode where later changes will
override the shape. See page 6.2.3.
13.5.11 LEDs
Fixture LEDs: Sets how the button LED behaves when a fixture is
patched to a fader handle.
[Show Occupation] – the LED shows handle empty and selection state
[Mimic Intensity] – the LED shows fixture intensity level.
The options below only function when [Show Occupation] is selected.
LED Empty Level: Sets level for unpatched handle.
LED Occupied Level: Sets level for occupied but unselected handle.
To Next Page
