Page 168 – 7. Cues
TitanUniversal_Man_v10_QU.doc 15 March 2016
LTP – If attributes are changed, the shape will stop running on those
attributes
Fader mode: This is the same option as set in the [Edit Times]
menu.
Mode 0 – Channels fade in as set by the fade time. The Fade Out time
is ignored. If times are set to zero, the HTP channels fade in with the
0-100% position of the playback fader and the LTP channels will
snap.
Mode 1 - HTP channels fade in and out as set by the fade out times
(LTP channels fade in but then remain as set in the cue). If times are
set to zero, the HTP levels will fade in and out with the fader and the
LTP channels will snap when the cue is fired.
Mode 2 – Both HTP and LTP channels follow the fader position. Useful
when used with a pan/tilt cue for manually tracking a spot across a
stage or down a catwalk using the fader position or for mixing colours
on RGB fixtures.
Mode 3 - Crossfade cue. All channels, including intensity channels,
will fade to the settings in the new cue. All other cues fade out and all
other active playbacks become inactive; if you need to re-fire a
playback, take the fader to zero and put it up again. Useful for setting
a video playback state.
7.6.2 Playback options - Handle
Handle paging: allows you to lock the playback on a handle so that
it always appears on that handle no matter what page is selected.
This is useful if you have some general playbacks you want on every
page, without having to copy the playback onto each page.
Unlocked – playback will change with the pages as normal
Transparent lock - playback will appear on all pages when the handle
is unprogrammed
Locked – this playback will appear on all pages. Playbacks
programmed on this handle on other pages will not be accessible.
Key profile: Sets the key profile individually for this playback. Global
sets the key profile back to the global setting for playbacks.
7.6.3 Playback options - Fader
Fader mode: same as in Playback tab, see above
Shape size: sets whether the fader position affects the size of
shapes in this playback
Fixed – no effect
Fader –size of all types of shape set by fader position
HTP fader – only dimmer shapes are controlled by fader position
Shape & effect speed: sets whether the fader position affects the
speed of shapes in this playback
Curve: Allows you to set a different curve shape for this playback –
curves are listed on the softkeys. The various curves are illustrated in
section 13.7 on page 251.
Y
ou can also allocate a Speed Master to the cue which will allow you
to modify the shape during playback, see section 7.2.4 on page 153.
To Next Page
