2. Setting up and using the console - Page 43
TitanUniversal_Man_v10_QU.doc 15 March 2016
• To save the show under a different name, use the [Save As]
softkey.
• Pressing the Disk button twice will force the console to save an
Autosave version of the file. Autosaves are stored in the same
folder as the normal show file.
• A new version of the file will be saved even if you enter the
same tag as previously used.
If you save to hard drive, shows are saved in the folder ‘D:\Show
Files’, unless you change this in the User Settings. When using the
Titan Simulator or Titan One, shows are saved to
‘Documents\Titan\Show Files’.
2.6.2 Loading a show
The console will automatically reload the last show when it is turned
on.
Press the Disk button then [Load Show] to load in a new show. The
Show Browser window will appear.
On the top left you can select which drive is used, or show files on all
drives. On the bottom left you can filter the list of shows to see all
shows, or just manual saves, quick saves or autosave files. On the
right you can see different versions of the showfile; this allows you to
reload an earlier version if you need to.
You can also load shows from the softkeys:
1> Press the Disk button.
2> Press [Load Show].
3> If you have a USB drive connected, select which drive you want
to load from.
4> Available shows are listed on the softkeys; press the key to load
the show (the F and G keys show more pages). If you type the
Available
disks/drives
Filter list of shows
List of shows
List of versions
Search bar
To Next Page
Loading...
