Page 246 – 13. User Settings and other options
TitanUniversal_Man_v10_QU.doc 15 March 2016
DMX Address: sets whether the DMX address of fixtures is shown in
the fixture touch buttons.
Auto Groups: sets whether the console will automatically create new
groups for fixtures when you patch.
Preset Palettes: sets whether preset palettes should be created
when fixtures are patched.
[Do Not Create] – no palettes will be created.
[Create On Workspaces] – palettes will be created in workspace
windows.
[Create On Presets] – palettes will be created on preset buttons.
13.5.5 Times
Tempo Units: sets the units for displaying tempo. The options are
[Beats per Minute] or [Seconds].
Connected View Sets: sets the console action when you change the
speed of a connected chase. [Connected View Sets Temporary Chase
Speed] means that the console will not save the modified speed, and
the next time the chase is fired it will go back to its programmed
speed. [Connected View Sets Chase Speed] means that the console
will modify the saved speed of the chase.
Preload Time: sets a fade time for the Preload function, normally 2
seconds. This value would normally be set for quiet fixture
movement.
Times Format: selects between HH:MM:SS format and Seconds
format. In HH:MM:SS format the console will convert any number you
enter into hours minutes and seconds.
13.5.6 Formatting
Channel Levels: sets how you enter channel levels when using
numeric entry of levels.
[Channel Levels Set In Tens] - enter one digit for the channel level
(e.g. 5 = 50%).
[Channel Levels Set in Units] - enter two digits, i.e. 50 = 50%.
Number Style: sets how channel values are displayed in Cue View
and Palette View.
[Precise] - will include all decimal places.
[Rounded] - round to nearest whole number.
[Dynamic] - show decimals where appropriate, remove trailing zeros.
13.5.7 Palettes
Quick Palettes: enables or disables the Quick Palette function. See
section 5.2.3.
Minimum Palette Mode: Set
s whether global or shared palettes will
be created when recording palettes.
Add New Palette Channels: sets whether new channels added into
palettes will be added to playbacks using those palettes.
Auto Legend: sets whether new items will automatically have
legends generated for them (colour scribbles for colours or descriptive
legends for other functions).
Highlight Active Palettes: sets whether active palettes are shown
as highlighted in the workspace windows.
To Next Page
