Description of the Software Modules and Parameters
Parameter manual b maXX BM5800
Document No.: 5.16029.03
167
of 814
3
106.61 SSI status
Status of SSI transmission:
106.62 SSI bits angle
Setting of bit numbers to transmit the angle (0 to 31).
106.63 SSI bits revolutions
Setting of bit numbers to transmit revolutions (0 to 31).
14 Binary code / Gray code
0: Transmitted in binary code
1: Transmitted in Gray code
15 Reserved
16 Parity
0: Transmitted without parity bit
1: Transmitted with parity bit
17 Even parity / odd parity
0: Even parity (bit 16 is set)
1: Odd parity (bit 16 is set)
31 ... 18 Reserved
Bit Meaning
Bit Meaning
0 Transmission activity
0: Transmission is not active
1: Transmission is active
1 Validity of data
0: The encoder data is invalid (parity error)
1: The output data is valid
2 Reserved
3 Parity error
0: No parity error
1: Parity error
31 … 4 Reserved
To Next Page
Loading...