Baumuller b maXX BM5800 - Page 448

Controllers
Parameter manual b maXX BM5800
Document No.: 5.16029.03 Baumüller Nürnberg GmbH
448
of 814
3.7
29.8 Filter order
The filter order can be entered here.
In order to change the parameters the filter either must be deactivated (Z29.1– = 0) or
the pulses must be inhibited.
29.9 Coefficient a0
Using this parameter, the filter coefficients for the particular axis (ZFig. 111– on page
442) can be entered accordingly (in the numerator polynomial).
In order to change the parameter the filter either must be deactivated (Z29.1– = 0) or the
pulses must be inhibited.
29.10 Coefficient a1
For description, see parameter Z29.9–.
29.11 Coefficient a2
For description, see parameter Z29.9–.
29.12 Coefficient a3
For description, see parameter Z29.9–.
29.13 Coefficient a4
For description, see parameter Z29.9–.
29.14 Coefficient a5
For description, see parameter Z29.9–.