Baumuller b maXX BM5800 - Page 449

Description of the Software Modules and Parameters
Parameter manual b maXX BM5800
Document No.: 5.16029.03
449
of 814
3
29.15 Coefficient a6
For description, see parameter Z29.9–.
29.16 Coefficient a7
For description, see parameter Z29.9–.
29.17 Coefficient b1
Using this parameter, the filter coefficients for the particular axis (ZFig. 111– on page
442) can be entered accordingly (in the denominator polynomial).
In order to change the parameter the filter either must be deactivated (Z29.1– = 0) or the
pulses must be inhibited.
29.18 Coefficient b2
For description, see parameter Z29.17–.
29.19 Coefficient b3
For description, see parameter Z29.17–.
29.20 Coefficient b4
For description, see parameter Z29.17–.
29.21 Coefficient b5
For description, see parameter Z29.17–.
29.22 Coefficient b6
For description, see parameter Z29.17–.