Brother HL-S7000DN - Page 10

Confidential
1.3 List of Maintenance-mode Functions.......................................................................... 5-2
1.4 Detailed Description of Maintenance-mode Functions ............................................... 5-3
1.4.1 EEPROM parameter initialization (Function code 01, 91) ................................. 5-3
1.4.2 Printing of test pattern (Function code 09) ........................................................ 5-4
1.4.3 Worker switch (WSW) setting (Function code 10)............................................. 5-5
1.4.4 Operational check of LCD (Function code 12) .................................................. 5-6
1.4.5 Operational check of control panel button (Function code 13) .......................... 5-7
1.4.6 Purge operations (Function code 17) ................................................................ 5-8
1.4.7 Individual operation of each unit (Function code 18)....................................... 5-10
1.4.8 Adjustment of waste ink box sensor (Function code 19) ................................. 5-14
1.4.9 Software version check (Function code 25)..................................................... 5-16
1.4.10 Carriage operations (Function code 31) ........................................................ 5-18
1.4.11 Operational check of sensors (Function code 32) ......................................... 5-20
1.4.12 LAN connection status display (Function code 33)........................................ 5-31
1.4.13 EEPROM Dump Print (Function code 40) ..................................................... 5-32
1.4.14 USB storage memory formatting function (Function code 41)....................... 5-37
1.4.15 Changing return value of USB No./
Adjusting of left-end print start position on second side in 2-sided printing
(Function code 45)......................................................................................... 5-38
1.4.16 Ink replacement purge inside head (Function code 49) ................................ 5-39
1.4.17 Continuous print test (Function code 67)....................................................... 5-40
1.4.18 Print adjustment (Function code 68).............................................................. 5-42
1.4.19 Frame pattern print (One-sided) (Function code 69) ..................................... 5-44
1.4.20 Frame pattern print (Two-sided) (Function code 70) ..................................... 5-45
1.4.21 Setting by country (Function code 74)........................................................... 5-46
1.4.22 Printout of maintenance information (Function code 77)............................... 5-47
1.4.23 Operational check of fans (Function code 78)............................................... 5-49
1.4.24 Display of device log information (Function code 80).................................... 5-50
1.4.25 Display of device error codes (Function code 82) ......................................... 5-55
1.4.26 Exit from the maintenance mode (Function code 99).................................... 5-55
2. OTHER SERVICE FUNCTION .................................................................5-56
2.1 Setting of ON/OFF of the Deep Sleep Mode ............................................................ 5-56
2.2 Reset for the Periodical Replacement Part .............................................................. 5-57
2.3 Deletion of User Setting Data ................................................................................... 5-58
2.4 Changing Return Value of USB No./
Adjusting of Left-end Print Start Position on Second Side in 2-sided Printing .......... 5-58
2.5 Mode Where Engine Is Not Operating...................................................................... 5-59