Brother HL-S7000DN - Page 9

Confidential
5.4 Resetting of Supply Pump ASSY Counter................................................................ 4-28
5.5 Attachment of Side Cover L...................................................................................... 4-28
6. WHEN REPLACING DRIVE SWITCHING UNIT......................................4-29
6.1 Adjustment of Waste Ink Box Sensor (Maintenance Mode: Code 19)...................... 4-30
6.2 Supply of Water ........................................................................................................ 4-32
6.3 Supply of Ink to Drive Switching Unit and Check of Ink Leak ................................... 4-32
6.4 Resetting of Drive Switching Unit Counter ............................................................... 4-32
6.5 Attachment of Side Cover L...................................................................................... 4-32
7. WHEN REPLACING ENGINE PCB ASSY...............................................4-33
7.1 Installing the Firmware.............................................................................................. 4-34
7.1.1 Firmware installation with a USB flash memory .............................................. 4-34
7.1.2 Firmware installation with a computer ............................................................. 4-34
7.2 Adjustment of Waste Ink Box Sensor (Maintenance Mode: Code 19)...................... 4-34
7.3 Input of Platen Adjustment Value (Maintenance Mode: Code 31) ............................ 4-35
7.4 Adjustment of Print Start Position (Maintenance Mode: Code 68)............................ 4-36
7.5 Printing of All Check Patterns................................................................................... 4-36
8. WHEN REPLACING MAINTENANCE DRIVE PCB ASSY......................4-37
8.1 Adjustment of Waste Ink Box Sensor (Maintenance Mode: Code 19)...................... 4-37
9. WHEN REPLACING PLATEN UNIT ........................................................4-38
9.1 Input of Platen Adjustment Value (Maintenance Mode: Code 31) ............................ 4-38
9.2 Supply of Ink to Platen Unit and Check of Ink Leak ................................................. 4-38
9.3 Resetting of Platen Unit Counter .............................................................................. 4-38
10. WHEN REPLACING WASTE INK TRAY ...............................................4-39
10.1 Adjustment of Waste Ink Box Sensor (Maintenance Mode: Code 19).................... 4-39
10.2 Counters Resetting for Waste Ink Box Leak Sensor .............................................. 4-39
11. WHEN REPLACING PF KIT/AIR FILTER/HUMIDIFY UNIT/
DRIVE SWITCHING UNIT/WASTE INK BOX.........................................4-40
12. NECESSARY OPERATION BEFORE TRANSPORTING MACHINE....4-41
12.1 Draining Ink from Machine (Maintenance Mode: Code 17) .................................... 4-41
12.2 Packing...................................................................................................................4-42
CHAPTER 5 SERVICE FUNCTIONS
1. MAINTENANCE MODE..............................................................................5-1
1.1 How to Enter the Maintenance Mode ......................................................................... 5-1
1.2 How to Enter the End User-accessible Maintenance Mode ....................................... 5-1