Brother HL-S7000DN - Page 314

3-146
Confidential
(3) Remove the two Collars to remove the Idle gear 26 and Idle gear 27 from the LT frame L.
Fig. 3-185
(4) Remove the four Taptite cup S M3x6 SR screws from the LT frame L and LT frame R.
Fig. 3-186
Idle gear 27
Idle gear 26
Collar
Collar
LT frame L
<Front>
Taptite cup S M3x6 SR
LT frame L
LT frame R
Taptite cup S M3x6 SR
<Front>
LT beam M