Brother HL-S7000DN - Page 315

3-147
Confidential
(5) Remove the two Taptite bind B M4x10 screws from the LT frame L.
(6) Remove the Bush of the Paper feed drive shaft from the LT frame L.
Fig. 3-187
(7) Push the LT frame L outward to remove the LT beam M in the direction of the arrows 7b
and 7c.
Fig. 3-188
Taptite bind B M4x10
Paper feed drive shaft
Bush
<Front>
LT frame L
LT frame L
7a
7c
7b
<Front>
LT beam M