2-22
Confidential
9304 When receiving print command
from tray 3, T3 paper empty
sensor detected no paper state.
2-97
9305 When receiving print command
from tray 4, T4 paper empty
sensor detected no paper state.
2-97
9306 When receiving print command
by auto, all paper empty
sensors detected no paper
state.
2-98
9401
The counter of tray 1 paper
level sensor indicates 10% or
less.
2-98
9402
The counter of tray 2 paper
level sensor indicates 10% or
less.
2-98
9403
The counter of tray 3 paper
level sensor indicates 10% or
less.
2-98
9404
The counter of tray 4 paper
level sensor indicates 10% or
less.
2-98
9501 When printing on paper fed
from MP tray, paper size sensor
detected that the size of paper
set on the tray was smaller than
the one specified by the printer
driver.
2-99
9502 When printing on paper fed
from tray 1, paper size sensor
detected that the size of paper
set on the tray was smaller than
the one specified by the printer
driver.
2-99
9503 When printing on paper fed
from tray 2, paper size sensor
detected that the size of paper
set on the tray was smaller than
the one specified by the printer
driver.
2-99
Error
Codes
Problem
Refer
to:
9504 When printing on paper fed
from tray 3, paper size sensor
detected that the size of paper
set on the tray was smaller than
the one specified by the printer
driver.
2-99
9505 When printing on paper fed
from tray 4, paper size sensor
detected that the size of paper
set on the tray was smaller than
the one specified by the printer
driver.
2-99
9701 During 2-sided printing, paper
size, which does not support
2-sided printing, was set by the
driver.
2-100
9702 When receiving print command
from tray 1, driver instructed
non-support size.
2-100
9703 When receiving print command
from tray 2, driver instructed
non-support size.
2-100
9704 When receiving print command
from tray 3, driver instructed
non-support size.
2-100
9705 When receiving print command
from tray 4, driver instructed
non-support size.
2-100
9801 During 2-sided printing, 2-sided
size sensor detected that there
is no paper on the 2-sided tray.
2-101
9802 During 2-sided printing, the
paper size switching lever of
2-sided tray and paper size
from the driver are not identical.
2-101
9803 When starting 2-sided printing,
back cover detected that the
cover is open state.
2-102
Error
Codes
Problem
Refer
to:
To Next Page
Loading...
Need help?
General
Weight and Dimensions
